Good Wholesale Vendors Diesel Generator 200 Kw - best quality 3 phase 120kva 120kw WP6D132E200 commercial generator industrial genset – Woda

Product know-how

The main items of Weichai generator maintenance:
1. The maintenance of our Weichai generator can usually be divided into: after daily maintenance operation, downtime, technical maintenance level, secondary technical maintenance (two quarters), technical maintenance (generally once a year).
Of course, the specific maintenance of the diesel generator set also needs to be revised according to the actual situation, and the equipment or equipment department should be revised according to the specific type of diesel generator set, structure and use.
2. The basic requirements for the maintenance of Weichai generator manufacturers are as follows.
First, ensure that the diesel generator set is clean and tidy, and the dirt on the inner and outer surfaces of the diesel generator set and the outer shell parts can be kept clean, which can reduce part of the oil and water corrosion, and also facilitate some failures such as cracks or damage.
Secondly, the control panel of the diesel generator set is installed on the control components, instruments and circuits, and should be kept clean and dry, otherwise it will reduce the insulation characteristics, component damage or line short circuit and other faults. As a result, operators should clean and regularly remove oil, dust and moisture, etc. on the exterior surfaces of the unit.
3. Under normal circumstances, the oil enters the combustion chamber between the piston and the cylinder wall, mainly because there is a gap between the piston ring and the ring groove. When the piston moves up and down, the piston ring can enter the combustion chamber through the oil in the cylinder wall. If the damaged piston ring is blocked by carbon deposits in the annular groove, piston ring, piston ring and cylinder wall cylinder, oil enters the combustion chamber, making the diesel engine in operation, which easily leads to an increase in the surface area of ​the combustion chamber components.